CCD Positioning system High speed LED light Automatic glue dispenser machine
Machine Features
- English interface option, easy to operate
- CCD positioning system, visual positioning compensation
automatically, correct the deviation of PCB.
- Large size track, suitable for different size of PCB.
- Contactless high speed injection dispensing head, dispensing glue
continously with high efficiency.
- Intelligent dispensing head ensure good performance , high
efficiency and lower glue wasting .
- Full time monitoring of glue volume, autoprompting low glue volume
.
- Dispensing head constant temperature function, ensure the glue in
liquid.
- Control the dispensing value in milliseconds, ensure the conformity
of glue volume.
- Online visual programming, more convinent.
- Automatic program standby, start up production rapidly, intelligent
manufacturing .
- Apply to various kinds (round, linear, lattice etc.) of products.
- High performance linear motor drive for X,Y axies, ensure high
accuracy in high speed.
- Universal signal connecting, connect equipment online easily.
- Large capacity SSD industrial control system ,high speed access
ensures system response speed.
| Model | HT-D12-1200 |
| Dimension |
| Length | 1800mm |
| Width | 1050mm |
| Height | 1550mm |
| Total Weight | 800kg |
| PCB |
| Max PCB size | 1200*500mm |
| PCB Clamping | Adjustable pressure pneumatic |
| Dispensing mode | Pneumatic injection value |
| O.S. |
| System | Windows7 |
| Software | R&D independently |
| Display | LED monitor |
| Input Device | Keyboard, Mouse |
| Vision System |
| No. of Camera | 1 set industrial camera |
| Dispensing accuracy | 0.1mm |
| Heating temperature | 200℃ |
| Dispensing height | <15mm |
| Dispensing speed | 90000CPH |
| Power | 220AC 50HZ |
| Power Consumption | 1.5kw |
| Operating Environment | 23℃±2℃ |
| Drive way | Magnetic linear motor drive |
| Max running Speed | 1200mm/sec |
| Transmission Direction | Single(left→ right or right→ left) |
| Transmission Way | Online drive |
| Gas consumption | 0.4-0.6mpa(4-6 kgf/cm2)150N/min |
| Electrical control | Independent research and development by ETON |
| Motion control card module 1 set | Independent research and development by ETON |
Company profile
ETON is not only in the leading position in the field of
photoelectric high-speed mounter, but also has made a breakthrough
in the field of SMT high-speed mounter. It has successfully
developed a number of high-cost SMT high-speed universal mounter.
Its products are widely used in lighting, display screen,
electronics, driving power supply, household appliances, new energy
and other industries.
What is a dispensing machine
Dispensing machine, also known as glue dispenser, glue dispenser,
glue applicator, automatic dispensing machine, etc., specializes in
the operation of fluid. The automatic technology equipment that
drips and applies the fluid on the product surface or inside the
product can complete the three-dimensional and four-dimensional
automatic dispensing machine, with accurate positioning and precise
glue control, no metal wire drawing, no glue leakage and no crystal
glue dropping. The dispensing machine is mainly used to accurately
point, inject, apply and drip the strong glue, paint and other
liquids in the product processing process to each precise part of
the product, and can be used to complete threading, scribing,
circle or arc.
Cleaning method of dispensing machine
1. Traditional cleaning method. Use volatile solvents such as
dichloromethane and DMF to clean the mixing head. This method of
cleaning is relatively thorough and the cost is not high But its
biggest disadvantage is to pollute the environment Because it is a
chemical product, volatile and toxic, and it is not recyclable,
which is inconsistent with the advocated trend of green
environmental protection, its use is limited, it is gradually not
accepted by the market, and it is gradually eliminated.
2. High pressure water cleaning. Although this method is non-toxic,
low cost and easy to operate, there is a common problem of
incomplete cleaning in the industry. At the same time,
high-pressure water cleaning will cause a waste of water resources
and produce a large amount of industrial wastewater, which is not
the best cleaning method.
3. Clean with recyclable environmental protection solvent. From the
perspective of society, this method is the most advocated. It is
environmentally friendly, recyclable and has good cleaning effect.
FAQ
Q:Does the price include the spare parts(feeder and nozzle)?
A:Different clients has different requirements on spare parts, it
is not fair to the clients to add in equivalent price for spare
parts. So we don’t add the spare parts cost on price, and price is
only for machine.
Q:What’s the minimum quantity of an order for your company?
A:1 set machine are welcomed to order, mixed orders are also
welcomed.
Q:This is the first time I use this kind of machine, is it easy to
operate?
A:It is easy to operate, the language of the machine is English,
and we will teach you the basic operation.
If you still have any questions, please contact us by e-mail,
WeChat, phone, Skype or other contact information.
Q:Can you provide a whole line solution?
A:Yes, we can, we can supply SMT line and some LED production
lines.
Q:Can we customize the machine?
A:Of course, all of our machines can be customize.
