Semi-auto stencil printer 600mm ET-S600
Application:
In smt production line, it is conbied by stencil printer, pick and
place machine, reflow oven, these three most important machine.
Our machine ET-S600 is the type of semi-autonatic stencil printer,
suitable for semi-automatic smt line.
Parameter:
Dimension:
Semi-automatic printer ET-S600 is 1.4 m length, 0.8 m width, 1.68
height.
Weight: Approx.200Kg
The platform size is 0.3*0.3 m
The temlate size is 0.55*0.83 m
PCB size:
The PCB size is 0.25*0.55 m
The PCB thickness is 0-50 mm
The PCB fine tuning range is Front/side±10mm
Others:
The Power supply: 1PAC220V 50/60HZ
The Platform height: 850±20mm
The Repeatability precision: ±0.01mm
The Positioning mode: Outside/Reference hole
Features:
ET-S600 suitabel for max pcb size:250*550 mm, the pcb thickness is
0-50 mm.
ET-S600 printing speed is 0-800 mm/min
The repeatability preciison is reach 0.01 mm.
The positioning mode is outside or reference hole.
Manual feeding board, machine printing, low price, high precision,
high cost performance
Misprinting plate cleaning :
For the cleaning of the misprinted board, first use the mixing
knife to scrape the solder paste on the board surface, but be
careful not to make too much force to prevent scratching the PCB,
and then wipe the board surface with cloth or paper. Be careful to
wipe it clean. Then blow the PCB with a wind gun. For PCBs with
gold fingers, special care should be taken not to immerse the board
in the wash water. Only wipe it with cloth or paper, and do not
wipe the gold finger. Gold fingers can't stick solder paste.
Logistics and delivery:
In order not to cause the machine to collide during handling, our
machine packing adopt vacuum add wooden box packing. It is very
firm.
Also we can accept shipping or training , even flying, it is
according to the customer needs. In generally, the machine will be
delivery in four weeks after payment.
