Components of pick and place machine ht-f8 can mount include
LED2121/2727/3528/5050 and resistor,capacitors,bridge
rectifiers,etc.
SMT mounter ht-f8 is especially applies to LED display. Max
mounting height is 15mm,mounting speed is 150000CPH.
4.Company profile
5.Our Our certificates and certifications
6.our services
7. trade show
- Ball bubble assembly line
- Since incandescent lamps and electronic energy-saving lamps still
occupy a very high proportion in people's daily use, in order to
reduce waste, LED lighting manufacturers must develop LED lighting
products that conform to existing interfaces and people's usage
habits, so that people can use a new generation of LED lighting
products without the need to replace the original traditional lamp
base and line. As a result LED the bulb came into being.
- Category:
According to lamp head classification, divided into B22,E26,E27,E14
Classification according to heat dissipation case: plastic case,
aluminum profile, ceramics
Type according to lamp holder: Snail: E27,E14,E22,E12; bayonet:
B22( bayonet must flush needle)
- Advantages of LED bulb: energy saving, environmental protection;
long service life; no strobe
more energy saving: the energy consumption of LED lamps is 1/4 of
that of energy saving lamps and 1/10 of incandescent lamps.
longer life :50,000 hours, three ~ five times the energy saving
lamp.
healthier: uniform light guide, no stroboscopic, no glare, no uv
and transverse.
More environmentally friendly: does not contain the pump lamp
harmful material, may recycle.
Full color change. Easy installation.
- Assembly Steps of Ball Bubbles
① manually put the drive board into the lamp cup;
② Machine calibration drive position (positioning);
③ Automatic Optical Source Board
④ Calendering Power Sheet for Automatic Pressing Machine
⑤ Automatic straightening
⑥ Automatic upper lamp head, test luminous or not, cut wire,
punching needle, upper rivet, then rivet detection
⑦ Electrical parameter test, light source board test, defective
products
⑧ Glue coating for dispensing
⑨ Automatic lampshade
⑩ Aging line, bad products
⑪ Automatic marking machine marking
⑫ Automatic packing
① LED automatic lamppost assembly machine
Artificial put drive into the lamp cup, put on the tray by the
manipulator grab to the assembly machine, CCD detection, position
detection, brush heat conductive silica gel, on the lamp bead
board, test.
② LED automatic lampholder assembly machine
After the main platform is loaded, the center line is automatically
adjusted, the upper head is mounted, the traverse is tested, and
the rivet is punched on the needle.
③ LED bubble shell gluing machine
High voltage resistance test, electrical parameters test, bad
products out. qualified product dispensing on the bubble shell.
④ LED bubble auto-aging line
Mainly for aging, four-stage voltage: high-voltage aging,
high-voltage aging, atmospheric impact, atmospheric aging.
⑤ LED automatic cleaning marking machine
Waiting for cleaning test, marking.
⑥ LED automatic packing machine
automatically open the box and pack the lamp box cover.
contact
Name:Brynn
Email :Brynn@eton-mounter.com
WeChat:13802252825
Telephone:138 0225 2825
